Very loving heart light bulb DIY

What can you do with old light bulbs? I have seen it used to grow plants before. Today I will teach you how to use old light bulbs to make a very loving love light bulb. When placed at home, it will be a beautiful and creative scenery!

Material preparation: red thin standard wire, incandescent light bulb, pliers, screwdriver, wooden strips or wooden squares, two thumbtacks, paper and pen, wire cutters, hot melt glue gun, hammer and nails, safety glasses.

step:

1. Prepare to hollow out the light bulb on the table. Make sure the space is large enough; if you break the glass, small shards may fly everywhere. Carefully clean the outside of the bulb.



2. Cut ten inches of wire to make hearts. Fold the wire in half to make a crease, then open it. One inch from the crease, turn both ends of the wire to create a heart shape. Pull both ends down and align them with the crease in the middle. You can adjust the shape of the heart according to your favorite shape. The width of the heart should also be about half an inch so that the light bulb can fit inside.



3. Put the heart into the bulb, roughly in the middle of the bulb, and compare how long it will take. Use pliers to cut off excess wire. Test whether putting all the hearts into the bulb will squeeze it and affect the shape. If so, shrink the heart.


4. Place the light bulb on the heart and fix it on the base with glue.

5. Use thumbtacks to secure your blessing to the front of the wood.